Wheels Manufacturing SPRE WMfg BB386Evo to SRAM Adaptor

  • £39.99
Item in Stock | Usually dispatched within 2-5 working days
  • Run SRAM cranks in your 386EVO frame
  • Shims are based on industry standard 386EVO bottom bracket shells
  • 386EVO is a 22 mm-wider version of PressFit 30, using the same cups, straight 46 mm bore and 30 mm spindle diameter but in an 86.5 mm-wide shell
  • Easy to install and machined for exact fit
  • Shims press fit directly into 386EVO bearings (6806 30 mm ID bearings)
  • You will need the 386EVO bearings already installed into the 386EVO shell to start this conversion
  • Removal is the opposite of installation
  • You may need to gently tap them out from the opposite side

UK Deliveries
FREE when you spend over £50.00 in a single order
Otherwise it's typically £3.99 per order
Delivery should be expected between 2-5 working days unless stated on product page.


Delivery of Bikes
We ship all our bikes free of charge within the United Kingdom (excl. Jersey and the Channel Islands at this time) and all our bikes come pre-assembled with just a few tweaks required (Please see our Bike Build Instruction page for details of assembly required).


All our bikes undergo a safety check before being re-boxed for shipping which can during busy periods take a little longer to complete so whilst we aim to ship all our bikes within two working days of the order please allow for additional time for this process.


Signature Required
All our consignments irrespective of the carrier require a signature upon delivery, deliveries are typically made between 08:00 and 18:00 so please bare this in mind when choosing a delivery address.


Package Recycling
We do try when possible to reuse packaging from our own suppliers in order to send purchased items to our customers, we ask if the packaging is still in good condition after you've received your goods then please try to use it again or recycle if not possible.



Payment via SagePay or Paypal for further information please click here.