Park Tool SPRE Park Cuts/reamers 41mm/45 deg h/set

  • £324.99
Item in Stock | Usually dispatched within 2-5 working days
  • Replacement cutter for HTR-1 tool to face and ream integrated headset systems
  • Facing improves the alignment of bearings in the headset
  • The Park tool 756-S set will ream and face the head tubes of bike that has the Integrated Headset system compatible with the Cane Creek standard that have 41 mm diameter bearings
  • Set includes non-interchangeable upper and lower cutters
  • Both will cut the frame to the 45-degree standard
  • The cutter mount on the Park tool HTR-1 Head tube Reamer and Facer
  • Some frames may require the use of the 750 Centring cone Adaptor
  • The 750 increases the size of the centring cone

UK Deliveries
FREE when you spend over £50.00 in a single order
Otherwise it's typically £3.99 per order
Delivery should be expected between 2-5 working days unless stated on product page.


Delivery of Bikes
We ship all our bikes free of charge within the United Kingdom (excl. Jersey and the Channel Islands at this time) and all our bikes come pre-assembled with just a few tweaks required (Please see our Bike Build Instruction page for details of assembly required).


All our bikes undergo a safety check before being re-boxed for shipping which can during busy periods take a little longer to complete so whilst we aim to ship all our bikes within two working days of the order please allow for additional time for this process.


Signature Required
All our consignments irrespective of the carrier require a signature upon delivery, deliveries are typically made between 08:00 and 18:00 so please bare this in mind when choosing a delivery address.


Package Recycling
We do try when possible to reuse packaging from our own suppliers in order to send purchased items to our customers, we ask if the packaging is still in good condition after you've received your goods then please try to use it again or recycle if not possible.



Payment via SagePay or Paypal for further information please click here.